ILRI Research Computing

User Tools

Site Tools

You are here: start » raid
raid

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
raid [2010/09/15 18:04] – aorthraid [2010/09/19 23:58] (current) – aorth
Line 126: Line 126:
 ==== Physical Disk Layout ==== ==== Physical Disk Layout ====
  
-We have one RAID controller, 'c1'.  Disks are plugged into ports, 'p1' - 'p11'.  The disks are then grouped into units (basically the rows), 'u0' - 'u2'.+We have one RAID controller, 'c1'.  Disks are plugged into ports, 'p0' - 'p11'.  The disks are then grouped into units (basically the rows), 'u0' - 'u2'.
  
 | Port 8 | Port 9 | Port 10 | Port 11 | | Port 8 | Port 9 | Port 10 | Port 11 |
Line 134: Line 134:
 ==== Repairing 'degraded' arrays ==== ==== Repairing 'degraded' arrays ====
  
-There is a utility, tw_cli, which can be used to control/monitor the hardware raid controller.+There is a utility, ''tw_cli'', which can be used to control/monitor the hardware raid controller.
  
 Study the output of ''show'' to know which controller to manage.  Then you can use ''/c1 show'' to show the status of that particular controller.  Things to look for: Study the output of ''show'' to know which controller to manage.  Then you can use ''/c1 show'' to show the status of that particular controller.  Things to look for:
Line 161: Line 161:
 3w-9xxx: scsi1: AEN: ERROR (0x04:0x0002): Degraded unit detected:unit=0, port=3</file> 3w-9xxx: scsi1: AEN: ERROR (0x04:0x0002): Degraded unit detected:unit=0, port=3</file>
  
-<code>$ sudo tw_cli +<code>$ sudo tw_cli
 Password:  Password: 
 //hpc-ilri> /c1 show //hpc-ilri> /c1 show
raid.1284573870.txt.gz · Last modified: by aorth